MICRO CRAWLER PRO TRAIL HUNTER ARMY GREEN – RTR 1:18
kr2 299
Utsolgt
1:18 crawler fra Absima. Størrelsen gir deg større muligheter til å crawle på mindre områder. Som for eksempel i hagen, i stua, på gutterommet og mye mer. Legg bare ut noen hindringer og sett i gang.
Fra produsenten:
Our 1:18 crawler in the PRO version can do more than some of its big brothers. Especially with the “Performance Upgrade” like portal axles front and rear, metal gearbox made of tool steel, 1.2″ tires and a modified drive ratio for even more torque it becomes a real crawler fun machine.
You do not need much space and the “Playground” is built quickly. For example, just throw a few pillows or on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the little crawler over even the most complicated-looking obstacles.
HIGHLIGHTS:
– Portal axles front & rear
– Metal gears on front and rear axles
– 2.4GHz transmitter/receiver unit
– Lighting system operated from the transmitter
– Oversize 1.2″ AT tires with internal bead lock system
– Chassis mounted 1kg steering servo with panhard bar
– PPX4 water resistant electronics
– Metal chassis frame
– Painted 1.2mm Lexan body
– Tight turning circle of 80cm
– Driving time of up to 45 minutes
– Steering angle of up to 45°
– Ultimate ground clearance due to portal axles and 1.2″ tires
– Metal gears on front and rear axles
– 2.4GHz transmitter/receiver unit
– Lighting system operated from the transmitter
– Oversize 1.2″ AT tires with internal bead lock system
– Chassis mounted 1kg steering servo with panhard bar
– PPX4 water resistant electronics
– Metal chassis frame
– Painted 1.2mm Lexan body
– Tight turning circle of 80cm
– Driving time of up to 45 minutes
– Steering angle of up to 45°
– Ultimate ground clearance due to portal axles and 1.2″ tires
Due to its design, the “Trail Hunter” chassis has probably the highest ground clearance currently available on the market.
Battery box and on-switch are located on the loading area. Thus, no disassembly of the body is necessary in daily use.
The operation of the standard lighting front and rear consisting of low beam and taillight is done directly on the transmitter by (repeated) actuation of the 3rd channel.
Newly developed portal axle with new drive ratio. This realizes a buttery smooth response at low speed and even more torque. With the new axle, up to 45° steering angle is also achieved. The gears in the axles is made of tool steel. CVD drive shafts are installed on the front axle.
New super soft 1.2″ “All Terrain” wheels with internal bead lock design.
Simple, balanced and easily accessible chassis layout with high performance drivetrain.
FEATURES:
– Scale: 1:18
– 4WD (all-wheel drive)
– 2.4GHz remote control system
– High Torque gears, reduction ratio 104:1
– 55T / 030 Brushed Motor
– Fully locked differentials (front & rear)
– Telescopic UJ cardan shafts
– Metal chassis frame
– Drag/Mountain Brake (prevents rolling on hills)
– Digital Proportional Control for sensitive driving maneuvers
– LED lighting
– Scale body with a lot of attachments
– Bead lock rims with super soft AT tires
– Waterproof 1kg mini steering servo
– 2-in-1 speed controller/receiver unit
– Driving time: approx. 45 minutes
– 4WD (all-wheel drive)
– 2.4GHz remote control system
– High Torque gears, reduction ratio 104:1
– 55T / 030 Brushed Motor
– Fully locked differentials (front & rear)
– Telescopic UJ cardan shafts
– Metal chassis frame
– Drag/Mountain Brake (prevents rolling on hills)
– Digital Proportional Control for sensitive driving maneuvers
– LED lighting
– Scale body with a lot of attachments
– Bead lock rims with super soft AT tires
– Waterproof 1kg mini steering servo
– 2-in-1 speed controller/receiver unit
– Driving time: approx. 45 minutes
TECHNISCHE DATEN:
Extreme approach and departure angle (67.4° / 80.5°)
Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50A
Remote control: 2.4GHz, 4-channel
Steering servo: 1kg actuating force, waterproof
Motor: 030 / 55T
Gear ratio: 104:1
Battery: LiPo 7.4V/2S 600mAh
Battery connector system: Molex 2-pin
Wheelbase: 158,5mm
ground clearance: 43,7mm
track width: 110mm
Length: 241mm
Width: 125mm
Height: 130.8mm
Weight: 400g
Wheels: 19.5x58mm
Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50A
Remote control: 2.4GHz, 4-channel
Steering servo: 1kg actuating force, waterproof
Motor: 030 / 55T
Gear ratio: 104:1
Battery: LiPo 7.4V/2S 600mAh
Battery connector system: Molex 2-pin
Wheelbase: 158,5mm
ground clearance: 43,7mm
track width: 110mm
Length: 241mm
Width: 125mm
Height: 130.8mm
Weight: 400g
Wheels: 19.5x58mm
SCOPE OF DELIVERY:
1* Mini PRO Crawler
1* 2.4GHz transmitter unit
1* LiPo battery 7.4V 600mAh
1* US charging cable
1* Sticker sheet
1* Manual DE/EN/FR
1* Mini tool kit
1* 2.4GHz transmitter unit
1* LiPo battery 7.4V 600mAh
1* US charging cable
1* Sticker sheet
1* Manual DE/EN/FR
1* Mini tool kit
REQUIRED ACCESSORIES:
4* AAA batteries for transmitter
Picture shows attachment parts which are purchaseable separately
Bare innloggede kunder som har kjøpt dette produktet kan legge igjen en omtale.
Omtaler
Det er ingen omtaler ennå.