Legg til ønskeliste
F-38 DELTA RACER PNP RED
F-38 DELTA RACER PNP RED - Bilde 2
F-38 DELTA RACER PNP RED - Bilde 3
F-38 DELTA RACER PNP RED - Bilde 4
F-38 DELTA RACER PNP RED - Bilde 5
F-38 DELTA RACER PNP RED - Bilde 6
F-38 DELTA RACER PNP RED - Bilde 7
F-38 DELTA RACER PNP RED - Bilde 8
F-38 DELTA RACER PNP RED - Bilde 9
F-38 DELTA RACER PNP RED - Bilde 10
F-38 DELTA RACER PNP RED - Bilde 11
F-38 DELTA RACER PNP RED - Bilde 12
F-38 DELTA RACER PNP RED - Bilde 13
F-38 DELTA RACER PNP RED - Bilde 14

F-38 DELTA RACER PNP RED

kr2 399

Utsolgt

Legg til ønskeliste
Produktnummer: 1-JPDF1200R Kategorier: ,
Key Features
  • High quality pre-painted scale EPO foam airframe.
  • Superb high- and low-speed performance.
  • Glue- and screw-together assembly.
  • Pre-installed high-quality hardware.
  • Very impressive power-to-weight ratio.
  • Magnetically retained canopy hatch.
  • Suits 3S 11.1V 2200mAh 30C LiPo.
  • Two pre-installed high-quality 9g servos.
  • Colour matched spinner.
  • Easy-launch finger grips.
Product Description

Looking for fast and furious R/C fun? Then you’ve come to the right place. Buckle up, tuck this tantalising F38 under your arm and prepare for a 3S-fuelled thrill that’ll have your clubmates rushing to buy their own. Make sure they get a different colour and enjoy triple the excitement as you go head-to-head in a bout of brute, brushless pylon racing. Packing a powerful pre-fitted 1200KV brushless motor, 30A ESC and supremely capable twin 9g servos, just 30 short minutes is all it takes to get this 3-channel PNP foamie airborne, and 30 seconds to get hooked! Docile, dead easy to launch and furiously fast, the JP F38 Hornet is the perfect all-weather grab ‘n’ go racer. Suitable for any occasion and almost any field, it’s a keeper.

 

Technical Specifications

Weights & Dimensions
Approx. Flying Weightkg1.2lbs
Shipping Weight2.81kg6.20lbs
Product Length550mm21.7in
Product Wingspan800mm31.5in
Product Wing Area25dm2379.75in2
What’s in the Box
  • 1x Pre-painted and decorated F-38 Delta Racer airframe.
  • 1x Pre-painted vertical stabliser fin set.
  • 1x Pre-fitted 2834-1200KV brushless motor.
  • 1x Pre-fitted 30A brushless ESC.
  • 1x Nose landing gear assembly (leg and wheel).
  • 1x Colour matched spinner.
  • 1x Hook and loop strip.
  • 2x Pre-fitted 9g servos.
  • 1x 8x6in tuned propeller.
  • 2x Elevon control horns.
  • 2x Servo pushrods with clevis.
  • 2x Fin decal set.
  • 1x Comprehensive instruction manual.
Needed to Complete
  • 1x 3-channel 2.4GHz transmitter and receiver combo with elevon mixing.
  • 1x 3S 2200mAh 30C LiPo with XT60 connector.
  • 1x 3S compatible balance charger.
  • 1x Suitable EPO foam glue.

Omtaler

Det er ingen omtaler ennå.

Bare innloggede kunder som har kjøpt dette produktet kan legge igjen en omtale.