1/48 F-35B LIGHTNING II

1/48 Lockheed Martin® F-35®B Lightning Ⅱ® plastbyggesett.

Fra produsenten:

About the Model ★This is a 1/48 scale plastic model assembly kit. Length: 325mm, wingspan: 222mm. ★The model can be assembled as one of three types: parked, short takeoff and vertical landing. ★Fine recreations of Radar Absorbent Material (RAM) are molded into fuselage surfaces. ★Engine duct and nozzle are assembled into one of three positions depending upon the type of model chosen. ★The engine nozzle is made up of 5 parts and gives an accurate, crisply detailed finish. ★Parts are included for raised and lowered versions of control surfaces. ★A stand is provided for use when assembling a vertical landing model. ★The lift fan is integrated with the nose landing gear bay. ★This model offers excellent fuselage interior detail. ★A full complement of ordnance includes AIM-9X and AIM-120C missiles, plus GBU-12 and GBU-32 bombs. ★A total of seven marking options is included, covering aircraft from three nations.

Packaging

★Tamiya designers conducted some seriously in-depth research to capture the stealthy F-35B with such accuracy.

★In short takeoff posture, the lift fan intake is open and the engine nozzle points diagonally downward.

★Choose whether to assemble the model in stealth mode (no external ordnance), air-to-air mode (missiles only), or beast mode (full ordnance).

★A stand is included to use if you are making a vertical landing model.

★The vertical landing model has its roll posts activated and engine nozzle pointing downward, plus two of the weapons bay doors half-open.

★Take a look at the F-35 in Beast Mode, with all its ordnance loaded!

★Here are the ordnance parts included in the kit.

★The lift fan interior is also depicted with accuracy, and has parts for both open and closed auxiliary duct.

★Peep inside the air intake door to see the cover for the lift fan shaft.

★Dedicated parts for open and closed lift fan lower doors, and for short takeoff and vertical landing louver positions.

★This image shows the engine duct/nozzle doors open.

★Here are the three positions for the engine duct, one for each of the model types that can be selected.

★A comparison of F-35A and F-35B nozzles on our models.

★The landing gear can also be assembled compressed or uncompressed.

★Compare the F-35A and F-35B canopies. This kit includes 2 sets of canopy parts, which can be swapped in and out after assembly.

★The cockpit has accurate depictions of the differences from the F-35A, and showcases superlative detail.

★The pilot figure has headgear with the helmet mounted display (HMD).

★Clear parts recreate the EOTS fairing under the nose. The nose landing gear bay is integrated with the lift fan sides for accurate assembly.

★If used, the stand is screwed into this location. The hole is covered by a magnet-affixed part.

★A truly comprehensive set of decals is included in the kit, for aircraft markings and stencils. Masking stickers are also provided.

★Take a closer look at the various marking options in the kit.

★Painting and marking guides are in full size and full color (this image shows stencils and two USMC marking options).

★Five more marking options are also detailed!

★Click here to take a look at all of the sprues in the kit

Information is current as of December 4, 2023. Specifications are subject to change without notice.