- Beste tilgjengelige servoreiseoppløsning.
- Fineste respons
- Programmerbar
- Høy aktiveringskraft
- Utmerket holdekraft
- Metallutstyr
- 2 kulelager MR106 / MR85
- 25 tenner for servohorn Programmerbare funksjoner:
- Stille inn endepunktet (0 ° -180 °), nøytral (standard ± 60 °)
- Stille inn rotasjonsretningen (med klokken / mot klokken)
- Stille inn dødsonen • Stille inn hastigheten (standard 100 %)
- Innstilling av myk start (standard 20 %)
- Stille inn fail safe funksjon
- Stille inn overbelastningsbeskyttelsen (standard av)
- Fabrikkinnstillinger kan gjenopprettes
- Leveringsomfang 1x servo MD250MW med magnetisk koder (pot løs)
- 1x festesett (skruer, øyne og gummihylser)
- 1x servospake (skive) M-O25 montert
- 1x servospak metall R-ML25 (bestillingsnummer 118719)
- 1x servo pakke M-I25 1x servospakke (kryss) M-X25
- 1x instruksjoner
Tekniske data:
Bredde: 15 mm
Høyde: 33 mm
Lengde: 35 mm
Vekt: 31gr
Servotype: Standard
Spesielle egenskaper: Digital Motortype
Servoer: børstet
Gir: Metall
Driftsspenning i V: 4,8-8,4 V
Hastighet / 60 ° ved 4,8 volt: 0,2
Hastighet / 60 ° ved 6,0 volt: 0,16
Hastighet / 60 ° ved 7,4 volt: 0,13
Dreiemoment i kgcm ved 4,8 volt: 5
Dreiemoment i kgcm ved 6,0 volt: 6
Dreiemoment i kgcm ved 7,4 volt: 8
Splines: 25T
Kulelager: Ja
Vanntett: Nei
15mm extra class!
A servo in the standard size cannot always be built in, and the 12-13 mm servos, on the other hand, are not strong and robust enough.
The solution, a 15mm servo that delivers enough power and is still very light.
In addition to the well-known D-series technology, which makes the servo fully programmable (details below),
this servo also comes with a magnetic encoder.
Ie contactless position recording, absolutely wear-free, infinite service life and extremely precise!
What more do you need?
A full metal housing that only makes the servo heavier but not more robust, certainly not.
The MD250MW can be used from 4.8 to 8.4 volts and is therefore ideally suited for mid-range helicopters, but best for planar models where power and a quick response from the rudder is required. This servo is the preferred choice for large sailors as a wing servo.
And with a force of ~ 9.1kgcm at 8.4 volts, it has a lot of power!
Features:
• Magnetic encoder / Hall sensor
• Best available servo travel resolution.
• Finest response
• Programmable
• High actuating force
• Excellent holding force
• Metal gear
• 2 ball bearings MR106 / MR85
• 25 teeth for servo horn
Programmable functions:
• Setting the end point (0 ° -180 °), neutral (standard ± 60 °)
• Setting the direction of rotation (clockwise / counterclockwise)
• Setting the dead zone
• Setting the speed (standard 100%)
• Setting Soft Start (standard 20%)
• Setting the fail-safe function
• Setting the overload protection (standard off)
• Factory settings can be restored
Omtaler
Det er ingen omtaler ennå.