Some like it bright! The POWER-MULTIlight is the first choice when you wish to fit out your model aircraft with a more realistic lighting system. The switchable landing light, navigation and anti-collision lights endow your model with a highly authentic look. The nine ultra-bright 8 mm LEDs are pre-wired (cable length per LED 1 m) and fitted with connectors, making installation very easy.
The POWER-MULTIlight is suitable for power models of around 1300 mm wingspan or larger, 500-size helicopters and larger, and model jets.
The following functions can be switched from the RC system transmitter.
1. Everything OFF
2. Navigation lights and anti-collision light ON
3. Navigation lights, anti-collision light and landing light ON
All functions are permanently ON if the system is connected directly to a power source.
If you wish to control the lighting system from the transmitter, a three-position switch and one free channel are required. Compatible with all RC systems.
– Nine LEDs, completely pre-wired: 2 x white double-flash, 2 x flashing red, 2 x white landing light, 1 x constant red, 1 x constant green, 1 x constant white
– Landing light and position lights can be switched on and off from the transmitter
– Low weight
– Ultra-bright LEDs
|Input voltage range:||7.4 ~ 12.6 V|
|LED output voltages:||Red LEDs: 2.3 V, white LEDs: 3.2 V, green LED: 3.2 V|
|Total output power:||4.5 W|
|Power of single LED:||500 mW|
|Case dimensions:||67 x 41 x 19.2 mm|
|Size of LEDs:||8 mm Ø, 8 mm high|
|Socket:||JST (red BEC socket)|
|Switched functions:||Everything OFF / Navigation lights and anti-collision light ON / Navigation lights, anti-collision light and landing light ON. If connected directly to the power source / battery all functions are permanently ON|
|Weight of control unit:||35 g|
|Total weight incl. all LEDs and leads:||55 ~ 60 g|