Super Avante ferdiglakkert i metallic blå og gul. Kommer som kit.

Fra produsenten:

Special Super Avante
This assembly kit creates a special version of the stylish Super Avante 4WD R/C buggy, the (znug design) Kota Nezu-designed polycarbonate body pre-painted in metallic blue and yellow, and pre-cut for convenience. Its fenders are likewise pre-cut and pre-painted in metallic blue, just requiring application of yellow stickers, while the rear wing is also already cut. A further splash of color is provided by yellow main frame and damper spring components.

TD4 – Low Profile, High Performance
The TD4 is a shaft-driven 4WD buggy chassis which employs front inboard suspension for slim, low-profile form. It features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance. The drivetrain uses full bearings, and sealed front/rear gearboxes have built-in ball differentials. Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup. 4-wheel independent double wishbone suspension utilizes CVA oil dampers. Turnbuckle shaft upper arms facilitate camber angle adjustment. Two types (high/low) of wing stays are included and star dish wheels are paired with square spike tires which offer superlative grip off-road.

★Left: The slim, low profile form is striking. On this model, the main frame is molded in yellow plastic.★Right: Front CVA oil dampers feature yellow springs, visible through the windows on the cockpit sides.

★Left: Rear CVA oil dampers also have yellow springs, adding a further splash of color to this buggy.★Right: The rear wing comes pre-cut for convenience. Choose between low and high stays (image shows low).

Specifications
★Length: 387mm, width: 246mm, height: 117mm (with low wing stays employed) ★Wheelbase: 283mm　★Tread: 214mm (front), 205mm (rear) ★Plastic bathtub frame ★Shaft-driven 4WD ★Front & rear ball differentials ★3-piece steering tie-rod ★4- wheel double wishbone suspension ★Tire width/diameter: 32/82mm (front), 41/82mm (rear) ★CVA oil dampers ★Gear ratio = 10.71:1 ★Full ball bearings ★Type 540 motor & Electronic Speed Controller (ESC) sold separately.

Separately Required Items
★Type 540 motor ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of February 24, 2022. Specifications are subject to change without notice.

Omtaler

Det er ingen omtaler ennå.

Bare innloggede kunder som har kjøpt dette produktet kan legge igjen en omtale.

RC SUPER AVANTE WITH PANTED BODY

Omtaler

Logg inn